“Although we build the micro energy harvesting modules from off-the-shelve components, the specific construction that we have adopted yields a very high mechanical-to-electrical energy conversion efficiency, up to 81% to be precise”, told us Jean-Frédéric Martin, Arveni's founder and CEO.
“This not only compares very favourably with the typical 12 to 15% of energy conversion you get from competing energy-harvesting switches” Martin added, “but thanks to this high conversion efficiency, we are able to design our switches with a lower actuation force and less noisy, making them more comfortable to use”.
Strong from the experience gathered with building automation partners as a consultant and R&D engineering company, Arveni is now launching a line of battery-less wall switches, able to remotely control a relay & timer receiver unit through a very low power radio link whose protocol it is making open source.
Dubbed SARAH for "SmArt RAdio by Harvesters for building automation", the open-source and collaborative radio protocol operates in the 868.3 MHz ISM band, relying on frequency modulation to deliver a communication range of 20 to 100 meters indoor. Drawing less than 0.3W, SARAH is particularly light to operate but rugged enough to reliably send the short switch identifiers and on/off status messages to paired relays.
“When discussing with building automation system engineers, either coming from large groups such as Bouygues Construction, or from small and medium enterprises, all would beg for interoperability and access to the source code”, recalls Martin from the days Arveni operated as a design office for equipment manufacturers.
“While there are already many radio protocols available for building control and automation systems, such as KNX, Z-Wave, EnOcean or ZigBee, all implemented under various product brands, the lack of interoperability between the different brands often locks building automation system installers into one brand, for the sake of simplicity”, explains Martin.
“For system maintenance, in the case a part needs to be replaced or if a layout change is required, the new owners or installers have no other option but to come back to the original manufacturer, at a premium cost since no other third-party service provider can intervene on the parts”.
“So when we looked at implementing light radio links for our own battery-less switches, after trying out many of the existing protocols on the market and figuring out all the incompatibility and cost issues, we decided to develop our own. The big difference is that we make SARAH free to use and open-source”, says Martin. “We wanted to break free from monopolistic radio protocols that don’t let you mix and choose the best parts from different vendors”.