SMARC 2.0 computer module supports USB-C

March 16, 2017 // By Julien Happich
Congatec's latest SMARC 2.0 modules now support the USB-C specification, allowing system designers to use USB-C for standard peripherals from USB 3.1 to USB 1.0 and for connecting displays or even the power supply to the system or peripheral devices.

In addition, the current data throughput of up to 5 Gigabit/s in line with the USB 3.1 specification serves as a turbo charger for data intensive applications. Based on Intel Atom, Celeron or Pentium processors (codename Apollo Lake), typical applications for SMARC 2.0 designs are handhelds and other mobile devices, in-vehicle devices and stationary embedded and IoT systems with low power and high performance demands.
System integrators can plug their USB-C compliant peripherals in any USB jack available on the board and it works. congatec initially implements USB-C on its new conga-SA5 SMARC 2.0 Computer-on-Module and the new evaluation carrier board conga-SEVAL. The comprehensive USB-C functionalities include USB 2.0, USB 3.1 Gen 1 support with data rates of up to 5 Gigabit/s and the alternate modes for Display Port 1.2 (DP-Alt) and USB Power Delivery (USB-PD) supporting a power envelope of up to 100W. All signals are simultaneously present at the point-symmetric female USB-C connector with 24 signal pins. For the power modes, the solution supports all USB-PD modes as specified by the Universal Serial Bus Implementers Forum (USB-IF). Besides the USB 3.0 compliant mode with 5 V and 1.5 A, it can provide additional voltages of 12 V and 15 V with a maximum current of 3 A and also 20 V with 5 A maximum current.

Visit congatec at www.congatec.com